Parking System Used Intelligent Vehicle Detection Loop with Two Relay Out

Parking System Used Intelligent Vehicle Loop Detector

Vehicle Loop Detector Quick Detail:

vehicle loop detector

1. Easy installation
2. Compatible with parking system
3. Single-loop and double-loop
4. Two relays out

Vehicle Loop DetectorApplications:

The WSTV-410 vehicle loop detector is a double-channel inductive loop detector. Its principle is based on a change in the inductance within the loop caused by the metallic components of passing vehicles. A microprocessor picks up and evaluates the changes. The Vehicle Loop Detector is easy to use thanks to automatic calibration when the operating voltage is applied.

The Vehicle Loop Detector detectors must only be placed in dry rooms or control cabinets that are protected against

all types of moisture and wetness. A distance of at least 10 mm from other devices must be maintained on each side. The ambient temperature must not exceed 65° C. The installation of the induction loop is described in other operating instructions. The Vehicle Loop Detector must only be placed in dry rooms or control cabinets protected against moisture and wetness. A distance of at least 10 mm from other devices must be maintained on each side. The ambient temperature must not exceed 65° C. The installation of the induction loop is described in other operating instructions.

Vehicle Loop Detector Specifications

Vehicle Loop Detector Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC

( See the label on the detector)

Vehicle Loop Detector Voltage tolerance AC: +10% / -15%

Vehicle Loop Detector Voltage tolerance DC: ±15%

Vehicle Loop Detector Power Consumption: 4.5VA

Vehicle Loop Detector Output relays: 240V/5A

Vehicle Loop Detector Operating temperature: -20°C to +65°C

Vehicle Loop Detector Storage temperature: -40°C to +85°C

Vehicle Loop Detector Frequency range: 20 kHz to 170 kHz

Vehicle Loop Detector Reaction time: 100ms

Vehicle Loop Detector Signal holding time: Unlimited

Vehicle Loop Detector Sensitivity: Adjustable in 3 increments

Vehicle Loop Detector inductance: Total loop plus connection wiring: 50μH to 1000μH.

Vehicle Loop Detector Ideal is 100μH to 300μH

Vehicle Loop Detector connection wiring: Maximum length 20 meters, twisted at least 20 times per meter

Vehicle Loop Detector Size of Housing: 78x40x108 mm (L x W x H)

Contact information:

Sue Zhang

Skype: SueZhang729

Whatsapp:+86 158 7925 9831

Email:sue@wonsunbarrier.com

traffic loop detectors

loop vehicle detector

Parking System Used Intelligent Vehicle Detection Loop with Two Relay Out Images